ChipPCBA Unveils Automated Heavy-Copper Assembly Cell for 350kW Mega-Watt EV Charging Systems
Operations Directorate
Industrial Automation
1. High Thermal-Mass Induction & Selective Soldering
Soldering heavy copper boards (6 oz - 12 oz) in standard reflow ovens often fails because the enormous thermal mass of the copper planes absorbs heat faster than standard convection can supply, causing cold joints on through-hole terminals.
The new cell features localized high-frequency electromagnetic induction heating paired with a specialized nitrogen-shrouded selective wave soldering robot, delivering 300°C focused heat to terminals in 1.8 seconds without blistering adjacent FR-4 resin.
Key Engineering Takeaways
- High-frequency induction soldering joins heavy 12 oz copper without board overheating.
- Nitrogen wave envelope prevents dross formation on high-amperage terminals.
2. Automated Busbar Screw Fastening and Inline 5kV Hi-Pot Testing
High-current boards require bolted copper busbars. The cell integrates multi-spindle collaborative robots equipped with digital torque transducers, torquing M5/M6 fasteners to exact specified tensions (±0.05 Nm) with camera-verified thread lock inspection.
Every completed assembly passes through an inline automated dielectric withstand tester, subjecting high-voltage channels to 5,000V AC dielectric stress to guarantee zero insulation leakage before packaging.
Key Engineering Takeaways
- Robotic screw driving logs torque profiles for each power busbar fastener.
- Automated 5kV hi-pot testing ensures zero dielectric breakdown in 800V DC chargers.
Heavy Copper Power PCBA Manufacturing Limits
Capabilities for high-power industrial and automotive fast-charging hardware.
| Capability Parameter | Standard SMT Line Limit | High-Power Dedicated Cell | Engineering Notes |
|---|---|---|---|
| Maximum Finished Copper Weight | 3 oz (105 µm) | Up to 12 oz (420 µm finished copper) | Inner and outer layers with deep dielectric isolation |
| Maximum Continuous Current Capacity | 40 Amperes RMS | Over 350 Amperes continuous per rail | Validated via thermal imaging under full resistive load |
| Automated Dielectric Withstand (Hi-Pot) | Sample testing up to 1,500V | 100% inline production testing up to 5,000V AC | Zero arc flash or partial discharge tolerance |
Need Prototype for this Design?
Turn your high-speed schematics into reality with ChipPCBA. Automated DFM, fast turnaround from 24h, and IPC Class 2/3 inspection standard. Free DFM analysis with every instant quotation.
Related Engineering Articles
View allHigh-Power Thermal Management: Copper Core, Thermoelectric Separation & Heavy Copper (6oz+) PCBs
Comprehensive guide to heavy copper foils (3oz to 10oz), thermoelectric separation in direct-plated copper (DPC), and IMS substrates delivering > 8.0 W/m·K thermal conductivity for EV inverters.
PoE++ (IEEE 802.3bt Type 4 90W) PCBA Design: DC Balance, Creepage Distances & Isolation Transformers
Engineering high-power 90W Power-over-Ethernet boards: pair-to-pair DC current imbalance, magnetic saturation prevention, RJ45 spark suppression, and IEC 62368-1 1500V isolation.
Direct Bonded Copper (DBC) & AMB Ceramic Substrates in 1200V SiC Inverter Modules
Explore high-thermal-conductivity ceramic substrates (Al2O3, AlN, Si3N4) and Active Metal Brazing (AMB) for high-power Silicon Carbide (SiC) and GaN traction inverters.