3
IPC/WHMA-A-620 Certified Wire Harness & Cable Manufacturing

Custom Cable Assembly &
Wire Harness Manufacturing

Custom cables and wire harnesses are the arteries and neurons of modern hardware, connecting modules, sensors, and peripherals across every industry. ChipPCBA replaces fragmented vendors and unpredictable lead times with a single streamlined online quotation workflow—from a single prototype harness to volume production with turnkey PCBA integration.

1 pc
Minimum Order Qty
Prototypes to Volume
11 Types
Cable Styles
Terminal, Coax, M12, USB
8+ Brands
Connector Families
JST, Molex, TE, Hirose
Class 2 & 3
IPC Workmanship
100% Continuity Tested
Bespoke Turnkey IntegrationVERIFIED MATING
Connector mate verification against BOM before fabrication
Integrated strain relief, overmolding, and pin-pull testing (≥50N)
One order, one dedicated point of contact for boards and cables
Built for Hardware Engineers

Why Choose ChipPCBA for Cable Assembly?

Eliminate vendor friction, fragmented lead times, and assembly mismatches by pairing custom wire harnesses with your PCB & PCBA manufacturing.

Single-Vendor Accountability

One order, one point of contact for boards and cabling

Eliminate finger-pointing between separate PCB fabricators, assembly houses, and harness makers. We verify connector BOM mating compatibility before producing.

Guided Online Quotation

Configure specs and get instantaneous price visibility

Our parametric engine captures complete engineering specifications up front—wire gauge, connectors, length, pinouts—drastically reducing back-and-forth engineering emails.

Prototype-to-Production Flexibility

1-piece MOQ to volume manufacturing

Whether you need a single prototype harness for proof-of-concept testing or 50,000 sets for OEM volume rollout, ChipPCBA provides seamless scalability on the same certified line.

Seamless Turnkey PCBA Integration

Board assembly + harness mating in the same factory

Cables can be soldered, mated, and strain-relieved directly into your turnkey PCBA order. Your completed hardware arrives tested and ready for immediate chassis assembly.

Engineering Capabilities

Cable Assembly & Wire Harness Capabilities

Precision manufacturing standards complying with IPC/WHMA-A-620 Class 2 & Class 3.

Cable & Harness Types5 Specifications
Supported Cable Styles
Discrete wire harness, Multi-core cable, FFC, IDC flat ribbon, Coaxial, USB, Industrial M-series, Heavy power, D-Sub, Ethernet, Audio
Wire Gauge Range
AWG 36 to AWG 4/0 (0.013mm² to 120mm²)
Cable Length
20mm to 100 meters (±2mm on <100mm; ±1% on >=100mm)
Jacket Materials
PVC, SR-PVC, XLPE, Silicone, PTFE, FEP, PUR, TPE, LSZH, Rubber
Certification Standards
UL wire styles (UL 1007, 1015, 1061, 1571, 2464, 2725, 3135, etc.), CSA, CE
Connector & Termination Capabilities5 Specifications
Connector Families
JST, Molex, TE Connectivity, Hirose, Amphenol, Weipu, Binder, Neutrik, Phoenix Contact, SAMTEC
Pitch Capabilities
Ultra-fine 0.5mm, 0.8mm, 1.0mm, 1.25mm up to standard 2.54mm, 3.96mm, 5.08mm, and power lugs
Termination Methods
Automated precision crimping, Solder cup soldering, IDC insulation displacement, Ultrasonic metal welding
Overmolding Boots
Custom low-pressure polyamide & high-pressure PVC/TPU overmolding tooling for strain relief & water ingress seal
Pin Pull-Force Verification
Exceeds UL 486A and IPC/WHMA-A-620 terminal crimp tensile retention specs (calibrated digital pull testers)
Quality Inspection & Workmanship Standards5 Specifications
Workmanship Standard
IPC/WHMA-A-620 Class 2 (Standard Commercial) & Class 3 (High-Reliability / Medical / Industrial)
Electrical Continuity Testing
100% automated pin-to-pin wiring continuity, short-circuit, and open-circuit testing on all assemblies
Insulation & Hi-Pot Testing
Programmable high-potential (Hi-Pot) withstand testing up to 1500V DC / AC; Insulation resistance >=100MΩ @ 500V
RF & Network Testing
Keysight / Rohde & Schwarz Vector Network Analyzers for RF VSWR (<1.20) and Fluke DSX-8000 for Cat6a / Cat7 testing
Environmental Testing
Thermal cycling (-40°C ~ +125°C), Salt spray test (48h/96h), IP67/IP68 air-pressure decay hermetic test
Product Catalog

11 Cable & Wire Harness Types We Manufacture

From flat flexible ribbons to industrial M-series waterproof harnesses. Click on any cable type to view full engineering specifications or configure an instant quote.

MOST POPULAR

Terminal Cable & Wire Harness

Precision crimped wire-to-board and wire-to-wire harnesses

AWG:32 AWG – 14 AWG
Rating:30V – 600V AC/DC
ULTRA-THIN

FFC (Flat Flexible Cable)

High-density ultra-thin flexible ribbons for tight enclosures

AWG:Flat copper conductor 0.035mm x 0.3mm – 0.1mm x 0.8mm
Rating:30V – 60V AC
MULTI-PIN

IDC Flat Ribbon Cable

Multi-conductor mass termination ribbon cables (6 to 64 pins)

AWG:28 AWG (7/36 stranded), 26 AWG
Rating:300V AC
HIGH FREQUENCY

RF Coaxial Cable Assembly

Precision low-loss 50Ω / 75Ω RF & microwave interconnects up to 18GHz

AWG:RG178, RG316, RG58, LMR-195, LMR-240, 0.81mm micro-coax
Rating:500V – 1500V RMS
TYPE-C & PD

Custom USB Cable Assembly

High-speed USB 2.0 / 3.2 / 4 & USB-C Power Delivery (up to 240W)

AWG:Power: 20-24 AWG; Data: 28-32 AWG twisted pairs
Rating:5V – 48V DC (USB PD 3.1)
HIGH CURRENT

Heavy Duty Power Cable Harness

High-current power distribution harnesses (up to 120A continuous)

AWG:16 AWG – 4/0 AWG (1.5mm² – 120mm²)
Rating:300V – 1000V DC / AC
FACTORY AUTOMATION

EU Industrial M-Series Cable

M8, M12, M16, M23 circular sensor & fieldbus interconnects

AWG:26 AWG – 18 AWG
Rating:30V – 630V AC/DC
SEALED IP68

IP67 / IP68 Waterproof Cable

Hermetically sealed overmolded cables for harsh environments & outdoor submersion

AWG:28 AWG – 12 AWG
Rating:125V – 500V AC
GIGABIT & CAT6A

Industrial & Custom Ethernet Cable

Cat5e, Cat6, Cat6a & Cat7 shielded networking cables (up to 10Gbps)

AWG:24 AWG – 28 AWG (Stranded or Solid)
Rating:30V – 60V DC (PoE / PoE+ / PoE++ 802.3bt up to 90W)
MIL & INDUSTRIAL

D-Subminiature Cable Assembly

DB9, DB15, DB25, DB37 & DB50 shielded serial & control cables

AWG:28 AWG – 22 AWG
Rating:300V AC/DC
ULTRA LOW-NOISE

Pro Audio & Signal Cable Assembly

Ultra low-noise balanced microphone, line-level, and instrumentation cables

AWG:24 AWG – 20 AWG twisted pair with spiral shield
Rating:100V AC
Turnkey PCBA + Cable Assembly Synergy

End-to-End Cable & PCBA Integration

Reduce final assembly labor and receive hardware closer to a finished product by having ChipPCBA integrate cables directly during PCBA manufacturing. Customers already ordering turnkey PCB assembly can simply extend their workflow to include cable termination, connector mating, strain relief, and routing within the same production facility.

Zero header-to-harness mismatch risks
Pre-mated & continuity verified in cleanroom
Integrated strain relief & custom overmolding
Direct chassis-ready sub-assembly delivery

The ChipPCBA One-Stop Advantage

❌ Traditional Fragmented Vendors:Vendor A builds PCB, Vendor B buys parts, Vendor C crimps wires. If header doesn't fit the plug, everyone blames each other.
✓ ChipPCBA Integrated Solution:Single vendor fabricates boards, sources connectors, crimps harnesses, tests mating, and guarantees 100% functionality.
Streamlined Workflow

How to Order Custom Cable Assembly with ChipPCBA

From online configuration to precision fabrication and international doorstep delivery.

1

Configure & Submit RFQ

Select your cable type, enter lengths, gauges, connectors, and attach your wiring pinout drawing or 3D CAD.

2

Connector & BOM Verification

Our engineers inspect connector mating compatibility against your PCB headers and verify crimp tool availability within 2-4 hours.

3

Precision Tooling & Assembly

Automated wire stripping, computer-controlled crimping, ultrasonic welding, or custom injection overmolding.

4

100% Quality & Electrical Test

Every single harness undergoes 100% automated pin-to-pin continuity, hi-pot insulation, and mechanical pull-force checks.

5

Protective Packaging & Fast Delivery

Anti-static bag sealed, custom barcoded, and dispatched globally via DHL / FedEx with real-time tracking.

ONLINE RFQ ENGINEIPC/WHMA-A-620 Workmanship Standard

Configure & Quote Custom Cable Assembly

1-piece minimum order quantity. Instant price estimation with connector mate verification against your PCBA order.

⚡ 2-4h Engineer Review
≈ 0.30 meters
MOQ: 1 pc (volume discounts ≥20pcs)

Have our factory directly terminate, pre-plug, and 100% test this cable harness with your turnkey PCBA order. Eliminates separate assembly labor and guarantees connector compatibility before dispatch.

Click to upload or drag & drop harness specifications

Supported formats: PDF schematic, STEP/DXF drawing, netlist, or reference photos

Quotation SummaryLIVE CALC

Parametric pricing with volume scaling

Selected Model:Terminal Cable
Batch Quantity:20 pcs
Estimated Unit Price:$5.65 / pc
Setup / Tooling Fee:$8.00
Volume Discount:-8% OFF
Est. Lead Time:3-5 business days
Estimated Total
$121.00USD

Taxes & global shipping calculated at final checkout.

Cable Type: TERMINAL
Config: Double-ended
A-End: JST XH 2.54mm
B-End: Molex Micro-Fit 3.0mm
Length: 300 mm (UL1007, 24 AWG)
✓ Turnkey PCBA Integration (Pre-mated & Tested)
100% Tested•IPC/WHMA-A-620•1 Pc MOQ
Frequently Asked Questions

Cable Assembly Service — FAQs

Common questions about custom wire harnesses, connector compatibility, and PCBA integration.

ChipPCBA supports 1-piece minimum order quantity (MOQ: 1 pc) for prototypes and pilot runs. There is no maximum order quantity, allowing you to transition effortlessly from prototype validation to high-volume container shipments.

Need Custom Tooling or Special Connectors?

Our senior cable engineering team is on standby 24/7 to review complex aerospace, medical, and high-frequency drawings.