ChipPCBA Unveils SiP (System-in-Package) & 2.5D Substrate Quick-Turn Prototyping Capability
Semiconductor Packaging Division
Advanced Micro-Substrates Group
1. Modified Semi-Additive Process (mSAP) Delivering 10µm Lines and Spaces
Traditional subtractive PCB etching limits trace widths to ~35 µm due to chemical undercutting. Our newly commissioned Class 1,000 cleanroom lines employ mSAP with ultra-thin seed copper (1.5 µm) and electroplated traces, achieving sharp rectangular cross-sections with 10 µm line/space resolution.
Key Engineering Takeaways
- 10 µm / 10 µm trace and space capability on BT-epoxy and Ajinomoto Build-up Film (ABF).
- Zero chemical trapezoidal undercut delivers pristine RF signal integrity.
2. Flip-Chip Micro-Bumping & Thermo-Compression Bonding with Capillary Underfill
The packaging line supports copper pillar micro-bumps down to 40 µm pitch. Precision pick-and-place with ± 1.5 µm vision alignment and vacuum thermal compression bonding ensures 100% coplanar interconnects across heterogeneous multi-die arrays.
Key Engineering Takeaways
- Sub-50 µm micro-bump flip-chip assembly.
- High-Tg capillary underfill verified via acoustic scanning microscopy (C-SAM).
3. Full Module EMI Sputtering & Epoxy Overmold Protection
Completed SiP modules are encapsulated using vacuum transfer molding followed by physical vapor deposition (PVD) to coat the package exterior with a 3 µm copper/stainless steel EMI shielding barrier, eliminating bulky external RF shields.
Key Engineering Takeaways
- Conformal PVD sputtering provides > 65 dB EMI isolation up to 40 GHz.
- Reduces final device packaging thickness by up to 1.4 mm.
SiP & Micro-Substrate Technical Capabilities
Fabrication boundaries for ChipPCBA's 2025 SiP packaging service.
| Packaging Parameter | Conventional Ultra-Fine HDI | ChipPCBA SiP Advanced Substrate | Engineering Notes |
|---|---|---|---|
| Minimum Trace / Space (L/S) | 35 µm / 35 µm (Subtractive) | 10 µm / 10 µm (mSAP Semi-Additive) | Allows ultra-dense die-to-die chiplet interconnects |
| Micro-Bump Pitch | 150 µm pitch | 40 µm - 60 µm Micro-Bump | High-density copper pillar + solder cap |
| Compartmental EMI Shielding | External stamped metal can | Selective physical vapor sputtering (PVD) | Saves 1.2mm in vertical module profile |
| Prototyping Turnaround Time | 6 - 8 weeks foundry cycle | 12 - 15 business days turnkey | From GDSII/substrate tapeout to molded module |
Need Prototype for this Design?
Turn your high-speed schematics into reality with ChipPCBA. Automated DFM, fast turnaround from 24h, and IPC Class 2/3 inspection standard. Free DFM analysis with every instant quotation.
Related Engineering Articles
View allEmbedded Component Technology (ECT): Integrating Passives & Active ICs into HDI Inner Layers
Engineering handbook for embedding thin-film resistors, planar capacitors, and bare die silicon into inner PCB cavities to recover 35% outer surface area and eliminate parasitic inductance.
PCIe 6.0 & PAM4 High-Speed Design: 32+ Layer Stackup, Loss Budget & Surface Roughness Compensation
Comprehensive analysis of PAM4 4-level modulation loss budgets, Megtron 7 dielectric selection, copper foil roughness compensation, and backdrill stub resonance elimination for 64 GT/s channels.
Design for Assembly (DFA): Best Practices for 0.25mm Pitch BGA and 01005 Components
Essential solder paste aperture ratios, pad land patterns, solder mask dam clearances, and thermal relief design for 0.25mm Pitch BGA and ultra-fine pitch components.