3
Hardware DesignHardware Design•Feb 10, 2026•7 min read

Embedded Copper Coin Press-Fit & Sintered Heat Spreader Integration for 500W GaN RF Amplifiers

DAT

Dr. Aris Thorne

Thermal & Power Systems Lead

Reviewed by: High-Power RF Group
Hardware Design
Gallium Nitride (GaN) high-electron-mobility transistors (HEMTs) in 5G base stations and active electronically scanned array (AESA) radar modules generate thermal power densities exceeding 100 W/cm². Standard thermal via arrays (thermal conductivity ~20 W/mK) cannot transfer this heat quickly enough. Embedding solid pure copper coins (thermal conductivity ~398 W/mK) directly beneath power devices reduces junction temperature by up to 35°C.

1. I-Coin vs. T-Coin Geometrical Architecture

Straight cylindrical or rectangular I-coins are press-fitted into precision-milled PCB cavities from the bottom side, flush with inner copper planes.

Stepped T-coins incorporate a wider base flange that acts as a physical mechanical stop during press-fitting, preventing coin tilt and guaranteeing coplanarity within ±15µm relative to top-side SMT soldering pads.

Key Engineering Takeaways

  • Stepped T-coins guarantee coplanarity within ±15µm for void-free solder paste printing.
  • Solid copper yields a 20x thermal conductivity improvement over thermal via arrays.

2. Press-Fit Interference and Sintered Silver Attachment

To prevent air gaps along the vertical perimeter, the PCB cavity is milled with a slight interference tolerance (typically 25µm to 40µm). A hydraulic servo press drives the coin into place with real-time force-displacement monitoring.

For ultra-high-reliability military amplifiers, the copper coin is bonded using micro-silver sintering paste, achieving an almost monolithic metallurgical bond with thermal resistance under 0.15 K/W.

Key Engineering Takeaways

  • Interference press-fit eliminates vertical interfacial thermal boundary barriers.
  • Silver sintering ensures long-term metallurgical stability above 200°C junction heat.

Thermal Dissipation Technology Comparison

Comparative thermal resistance benchmarks for RF power transistor mounting.

Thermal Dissipation SolutionEffective Thermal ConductivityJunction-to-Case Delta-T (50W Die)Engineering Notes
Standard Thermal Vias (0.3mm plated hole)15 - 25 W / m·K+ 42°C temperature riseHigh thermal resistance bottleneck
Copper-Filled Laser Microvia Array60 - 80 W / m·K+ 28°C temperature riseBetter, but limited by surrounding dielectric resin
Solid Embedded Copper Coin (T-Coin)390 - 400 W / m·K+ 8.5°C temperature rise (4x cooler)Direct metallic conduction straight to bottom chassis heatsink
Tags:#Copper Coin#Embedded Heatsink#GaN RF#Press-Fit#Thermal Resistance
Fabrication Ready

Need Prototype for this Design?

Turn your high-speed schematics into reality with ChipPCBA. Automated DFM, fast turnaround from 24h, and IPC Class 2/3 inspection standard. Free DFM analysis with every instant quotation.

Related Engineering Articles

View all
Hardware Design10 min read

High-Power Thermal Management: Copper Core, Thermoelectric Separation & Heavy Copper (6oz+) PCBs

Comprehensive guide to heavy copper foils (3oz to 10oz), thermoelectric separation in direct-plated copper (DPC), and IMS substrates delivering > 8.0 W/m·K thermal conductivity for EV inverters.

Hardware Design8 min read

Direct Bonded Copper (DBC) & AMB Ceramic Substrates in 1200V SiC Inverter Modules

Explore high-thermal-conductivity ceramic substrates (Al2O3, AlN, Si3N4) and Active Metal Brazing (AMB) for high-power Silicon Carbide (SiC) and GaN traction inverters.

Hardware Design12 min read

Sub-THz & 77GHz-81GHz Radar PCB Engineering: PTFE Laminate Selection, Waveguide Transitions & Surface Plating

Critical guidelines for automotive radar and sub-THz imaging hardware: Rogers RO3003 vs. Megtron 8, substrate-integrated waveguide (SIW) vias, and nickel-free surface finishes.