Embedded Copper Coin Press-Fit & Sintered Heat Spreader Integration for 500W GaN RF Amplifiers
Dr. Aris Thorne
Thermal & Power Systems Lead
1. I-Coin vs. T-Coin Geometrical Architecture
Straight cylindrical or rectangular I-coins are press-fitted into precision-milled PCB cavities from the bottom side, flush with inner copper planes.
Stepped T-coins incorporate a wider base flange that acts as a physical mechanical stop during press-fitting, preventing coin tilt and guaranteeing coplanarity within ±15µm relative to top-side SMT soldering pads.
Key Engineering Takeaways
- Stepped T-coins guarantee coplanarity within ±15µm for void-free solder paste printing.
- Solid copper yields a 20x thermal conductivity improvement over thermal via arrays.
2. Press-Fit Interference and Sintered Silver Attachment
To prevent air gaps along the vertical perimeter, the PCB cavity is milled with a slight interference tolerance (typically 25µm to 40µm). A hydraulic servo press drives the coin into place with real-time force-displacement monitoring.
For ultra-high-reliability military amplifiers, the copper coin is bonded using micro-silver sintering paste, achieving an almost monolithic metallurgical bond with thermal resistance under 0.15 K/W.
Key Engineering Takeaways
- Interference press-fit eliminates vertical interfacial thermal boundary barriers.
- Silver sintering ensures long-term metallurgical stability above 200°C junction heat.
Thermal Dissipation Technology Comparison
Comparative thermal resistance benchmarks for RF power transistor mounting.
| Thermal Dissipation Solution | Effective Thermal Conductivity | Junction-to-Case Delta-T (50W Die) | Engineering Notes |
|---|---|---|---|
| Standard Thermal Vias (0.3mm plated hole) | 15 - 25 W / m·K | + 42°C temperature rise | High thermal resistance bottleneck |
| Copper-Filled Laser Microvia Array | 60 - 80 W / m·K | + 28°C temperature rise | Better, but limited by surrounding dielectric resin |
| Solid Embedded Copper Coin (T-Coin) | 390 - 400 W / m·K | + 8.5°C temperature rise (4x cooler) | Direct metallic conduction straight to bottom chassis heatsink |
Need Prototype for this Design?
Turn your high-speed schematics into reality with ChipPCBA. Automated DFM, fast turnaround from 24h, and IPC Class 2/3 inspection standard. Free DFM analysis with every instant quotation.
Related Engineering Articles
View allHigh-Power Thermal Management: Copper Core, Thermoelectric Separation & Heavy Copper (6oz+) PCBs
Comprehensive guide to heavy copper foils (3oz to 10oz), thermoelectric separation in direct-plated copper (DPC), and IMS substrates delivering > 8.0 W/m·K thermal conductivity for EV inverters.
Direct Bonded Copper (DBC) & AMB Ceramic Substrates in 1200V SiC Inverter Modules
Explore high-thermal-conductivity ceramic substrates (Al2O3, AlN, Si3N4) and Active Metal Brazing (AMB) for high-power Silicon Carbide (SiC) and GaN traction inverters.
Sub-THz & 77GHz-81GHz Radar PCB Engineering: PTFE Laminate Selection, Waveguide Transitions & Surface Plating
Critical guidelines for automotive radar and sub-THz imaging hardware: Rogers RO3003 vs. Megtron 8, substrate-integrated waveguide (SIW) vias, and nickel-free surface finishes.