3
News & EventsSiP Milestone•Jun 05, 2025•5 min read

ChipPCBA Unveils SiP (System-in-Package) & 2.5D Substrate Quick-Turn Prototyping Capability

SPD

Semiconductor Packaging Division

Advanced Micro-Substrates Group

Reviewed by: CTO Office
SiP Milestone
Bridging the gap between traditional PCBA and semiconductor packaging, ChipPCBA has officially launched its System-in-Package (SiP) rapid prototyping service. Featuring 10µm L/S modified semi-additive (mSAP) substrates, thermal compression bonding (TCB), and transfer molding, engineers can prototype complete heterogeneously integrated modules in under 15 days.

1. Modified Semi-Additive Process (mSAP) Delivering 10µm Lines and Spaces

Traditional subtractive PCB etching limits trace widths to ~35 µm due to chemical undercutting. Our newly commissioned Class 1,000 cleanroom lines employ mSAP with ultra-thin seed copper (1.5 µm) and electroplated traces, achieving sharp rectangular cross-sections with 10 µm line/space resolution.

Key Engineering Takeaways

  • 10 µm / 10 µm trace and space capability on BT-epoxy and Ajinomoto Build-up Film (ABF).
  • Zero chemical trapezoidal undercut delivers pristine RF signal integrity.

2. Flip-Chip Micro-Bumping & Thermo-Compression Bonding with Capillary Underfill

The packaging line supports copper pillar micro-bumps down to 40 µm pitch. Precision pick-and-place with ± 1.5 µm vision alignment and vacuum thermal compression bonding ensures 100% coplanar interconnects across heterogeneous multi-die arrays.

Key Engineering Takeaways

  • Sub-50 µm micro-bump flip-chip assembly.
  • High-Tg capillary underfill verified via acoustic scanning microscopy (C-SAM).

3. Full Module EMI Sputtering & Epoxy Overmold Protection

Completed SiP modules are encapsulated using vacuum transfer molding followed by physical vapor deposition (PVD) to coat the package exterior with a 3 µm copper/stainless steel EMI shielding barrier, eliminating bulky external RF shields.

Key Engineering Takeaways

  • Conformal PVD sputtering provides > 65 dB EMI isolation up to 40 GHz.
  • Reduces final device packaging thickness by up to 1.4 mm.

SiP & Micro-Substrate Technical Capabilities

Fabrication boundaries for ChipPCBA's 2025 SiP packaging service.

Packaging ParameterConventional Ultra-Fine HDIChipPCBA SiP Advanced SubstrateEngineering Notes
Minimum Trace / Space (L/S)35 µm / 35 µm (Subtractive)10 µm / 10 µm (mSAP Semi-Additive)Allows ultra-dense die-to-die chiplet interconnects
Micro-Bump Pitch150 µm pitch40 µm - 60 µm Micro-BumpHigh-density copper pillar + solder cap
Compartmental EMI ShieldingExternal stamped metal canSelective physical vapor sputtering (PVD)Saves 1.2mm in vertical module profile
Prototyping Turnaround Time6 - 8 weeks foundry cycle12 - 15 business days turnkeyFrom GDSII/substrate tapeout to molded module
Tags:#System in Package#2.5D Packaging#Chiplet#Micro-Bumping#Advanced Substrates
Fabrication Ready

Need Prototype for this Design?

Turn your high-speed schematics into reality with ChipPCBA. Automated DFM, fast turnaround from 24h, and IPC Class 2/3 inspection standard. Free DFM analysis with every instant quotation.

Related Engineering Articles

View all
Hardware Design11 min read

Embedded Component Technology (ECT): Integrating Passives & Active ICs into HDI Inner Layers

Engineering handbook for embedding thin-film resistors, planar capacitors, and bare die silicon into inner PCB cavities to recover 35% outer surface area and eliminate parasitic inductance.

Hardware Design12 min read

PCIe 6.0 & PAM4 High-Speed Design: 32+ Layer Stackup, Loss Budget & Surface Roughness Compensation

Comprehensive analysis of PAM4 4-level modulation loss budgets, Megtron 7 dielectric selection, copper foil roughness compensation, and backdrill stub resonance elimination for 64 GT/s channels.

SMT Assembly8 min read

Design for Assembly (DFA): Best Practices for 0.25mm Pitch BGA and 01005 Components

Essential solder paste aperture ratios, pad land patterns, solder mask dam clearances, and thermal relief design for 0.25mm Pitch BGA and ultra-fine pitch components.