3
Free for up to 10 Prototype Boards100% Verification Before Dispatch

PCBA Functional Testing (FCT) & Firmware Flashing

Ensure every assembled board operates flawlessly before shipping. ChipPCBA engineers build dedicated Pogo-Pin test fixtures, flash your target production binaries, and run automated functional diagnostics with verifiable test logs.

ChipPCBA Comprehensive Testing Scope

Customized test sequences tailored directly to your engineering test plan.

1. Power & Electrical Rails

Measurement of VCC rails (1.8V, 3.3V, 5V, 12V), quiescent sleep current, DC-DC ripple noise, and short-circuit protection tripping.

2. MCU Firmware Flashing

Programming microcontrollers, DSPs, and Flash memory via SWD, JTAG, ISP, and UART (STM32, ESP32, NRF52, Microchip, TI, Renesas).

3. Communication Interfaces

Loopback and packet error rate testing across USB 2.0/3.0, Ethernet, CAN bus, RS485, I2C sensor polling, and SPI Flash integrity.

4. RF & Wireless Calibration

RSSI signal strength verification, antenna matching checks, and Bluetooth/Wi-Fi mac address provisioning in shielded enclosures.

5. Peripheral I/O Verification

Tactile button actuation checks, LED color and luminance confirmation, buzzer frequencies, and display screen pixel verification.

6. Traceable FCT Reports

Every board receives a unique laser-engraved 2D DataMatrix barcode linking to its individual test log and Certificate of Conformance.

Custom Test Fixture (Jig) Fabrication

Built in-house in our CNC machining workshop

Gold-Plated Crown Pogo Pins

Pogo-Pin Clamshell Jigs:

  • High-durability Bakelite and transparent ESD acrylic structural frames.
  • Precision CNC drilled probe locations with ±0.05mm positioning tolerance.
  • Spring-loaded gold-plated pogo pins with diamond or crown tips for clean contact on test points (TP).
  • Integrated quick-clamp mechanical or pneumatic press mechanism for ergonomic multi-board testing.

What You Need to Provide:

  • Test Procedure Document: Step-by-step instructions with pass/fail criteria (e.g. Expected voltage: 3.3V ± 0.1V).
  • Firmware Binary: Production .bin or .hex file with programming instructions.
  • Test Point Coordinates: Marked in Gerber or silkscreen layer (TP1, TP2, GND, SWDIO, SWCLK).
  • Special Hardware: If proprietary programmer dongles are required, you may courier them to our team.
Free functional testing included for up to 10 prototype units on all turnkey PCBA orders.Configure PCBA with FCT Testing