3
Online Engineering ToolIEC 60062 / EIA-RS-279 CompliantE24 / E96 Standard Decade Checking

5-Band Resistor Color Code Calculator

Calculate nominal resistance, guaranteed tolerance ranges, and minimum/maximum ohmic limits for precision 5-band metal film resistors. Supports bidirectional forward color band decoding and reverse target resistance searching.

Axial Resistor 5-Band Color Renderer

Photorealistic ceramic body with metallic leads, IEC 60062 spacing, and cylindrical specular lighting.

470×100±1%◀ Reading Order: 1st Digit → Tolerance ▶
Standard Presets:
Calculated ResistanceStandard E24 Series (5% / 1%)
47 kΩ±1%
Min: 46.53 kΩ•Max: 47.47 kΩ•Guaranteed Interval: [46,530 Ω — 47,470 Ω]
yellow
violet
black
red
brown

5-Band Color Selection Matrix

Click any color to update band
Band 1
1st Significant Digit
Band 2
2nd Significant Digit
Band 3
3rd Significant Digit
Band 4
Multiplier
Band 5
Tolerance
1

Identify Reading Direction

Look for the wider separation gap between Band 4 (multiplier) and Band 5 (tolerance). Start reading from the side opposite to the wider gap.

2

3 Significant Digits

5-band precision resistors provide three digits of resolution (e.g. 4-7-0) instead of two, allowing 1% and 0.5% precision on standard E96 series.

3

Multiplier & Tolerance

Multiply the 3-digit base number by the 4th band multiplier, then apply the 5th band tolerance to determine the physical manufacturing variance.

IEC 60062 5-Band Resistor Color Code Table

Standardized color reference chart used for through-hole axial resistors and precision passive electronic components.

ColorBand 1 (1st Digit)Band 2 (2nd Digit)Band 3 (3rd Digit)Band 4 (Multiplier)Band 5 (Tolerance)
Black000× 1 (10⁰)—
Brown111× 10 (10¹)±1% (F)
Red222× 100 (10²)±2% (G)
Orange333× 1 kΩ (10³)—
Yellow444× 10 kΩ (10⁴)—
Green555× 100 kΩ (10⁵)±0.5% (D)
Blue666× 1 MΩ (10⁶)±0.25% (C)
Violet777× 10 MΩ (10⁷)±0.1% (B)
Gray888× 100 MΩ (10⁸)±0.05% (A)
White999× 1 GΩ (10⁹)—
Gold———× 0.1 (10⁻¹)±5% (J)
Silver———× 0.01 (10⁻²)±10% (K)

4-Band vs 5-Band Resistor Code

4-band resistors are typically used for general-purpose carbon film resistors with ±5% (gold) or ±10% (silver) tolerance on the E12 or E24 series. They have 2 significant digit bands, 1 multiplier, and 1 tolerance band.

5-band resistors, on the other hand, provide 3 significant digits, enabling 1%, 0.5%, and 0.1% precision on metal film resistors in the E96 and E192 series.

ChipPCBA SMT Assembly & Through-Hole Guidelines

When designing PCB assemblies with through-hole axial resistors, ensure proper lead span and pad diameter according to IPC-7351. ChipPCBA supports automated axial tape reel feeding, automatic lead forming, and selective wave soldering.

Learn about ChipPCBA Turnkey PCBA