3
News & EventsCleanroom Facility•Nov 05, 2026•5 min read

ChipPCBA Commissions ISO Class 5 (Class 100) Cleanroom for Co-Packaged Optics (CPO)

CC

Corporate Communications

Operations Directorate

Reviewed by: Cleanroom Compliance Board
Cleanroom Facility
ChipPCBA has officially cut the ribbon on its flagship 3,000 m² ISO Class 5 (Federal Standard 209E Class 100) cleanroom facility. Engineered specifically for Co-Packaged Optics (CPO), bare-die semiconductor wire-bonding, and active medical implants, the new module guarantees airborne particulates under 3,520 particles/m³ at ≥0.5µm.

1. Advanced Environmental Controls and Laminar Flow

The expanded cleanroom incorporates ULPA filtration matrices with a 99.9995% efficiency rating, maintaining positive chamber air pressure at +35 Pa relative to ambient corridors to prevent particulate ingress.

Automated humidity and temperature regulation keeps temperature locked at 21.0°C ± 0.5°C with relative humidity at 45% ± 3%, preventing electrostatic discharge (ESD) build-up while suppressing moisture-induced solder defects.

Key Engineering Takeaways

  • ULPA filtration ensures <3,520 particles/m³ at 0.5µm for bare die and fiber arrays.
  • Continuous automated monitoring alerts process engineers to differential pressure shifts.

2. Precision Optical Die-Attach and Sub-Micron Alignment

Equipped with multi-axis robotic pick-and-place systems capable of ±0.5µm post-bond accuracy, the bay allows automated eutectic Au-Sn bonding and active fiber array V-groove alignment for 800Gbps and 1.6Tbps optical engines.

Full inline nitrogen purging protects sensitive photonic surfaces and copper-pillar flip chips against oxidation prior to vacuum underfill dispensing.

Key Engineering Takeaways

  • Sub-micron placement enables direct optical coupling with insertion loss < 0.2 dB.
  • Nitrogen envelope guarantees zero oxidation during high-temperature eutectic reflow.

Cleanroom Classification & Environmental Standards

Particulate count limits and environmental controls for ChipPCBA cleanroom wings.

Environmental ParameterISO Class 7 (Class 10k)ChipPCBA ISO Class 5 (Class 100)Engineering Notes
Maximum Particles / m³ (≥ 0.5 µm)352,000 particles/m³3,520 particles/m³ (100x cleaner)Continuously sampled by laser airborne particle counters
Air Change Rate60 - 90 air changes/hour240 - 360 air changes/hourFull vertical laminar ceiling flow
ESD Grounding & Flooring Resistance< 1.0 x 10⁹ Ω< 1.0 x 10⁶ Ω (Conductive Epoxy)Continuous worker wristband & heel strap grounding monitor
Tags:#Cleanroom#ISO Class 5#CPO#Optical Assembly#Facility
Fabrication Ready

Need Prototype for this Design?

Turn your high-speed schematics into reality with ChipPCBA. Automated DFM, fast turnaround from 24h, and IPC Class 2/3 inspection standard. Free DFM analysis with every instant quotation.

Related Engineering Articles

View all
News & Events4 min read

ChipPCBA Upgrades Advanced Microelectronics Assembly Facility to ISO Class 6 (Class 1,000) Cleanroom

5,000 m² cleanroom expansion achieves ISO Class 6 airborne particulate standards with positive-pressure laminar airflow and real-time ESD floor monitoring.

Hardware Design8 min read

Glass Core Substrates for Next-Gen SiP & 2.5D/3D Semiconductor Packaging

Glass core substrates overcome the thermal expansion and warpage limits of organic substrates, delivering ultra-tight through-glass vias (TGV) and sub-micron dimensional stability for AI compute chiplets.

News & Events5 min read

ChipPCBA Receives ISO 13485:2026 Recertification for Surgical Robotics & Implantable Electronics

Successful audit by TÜV SÜD confirms ChipPCBA meets the most rigorous ISO 13485:2026 and FDA 21 CFR Part 820 medical device manufacturing standards.