3
Hardware DesignSiP & Packaging•Nov 18, 2026•8 min read

Glass Core Substrates for Next-Gen SiP & 2.5D/3D Semiconductor Packaging

DLC

Dr. Lin Chen

Principal Packaging Architect

Reviewed by: ChipPCBA Semiconductor Lab
SiP & Packaging
As semiconductor packaging scales to multi-reticle AI processors and high-density chiplets, traditional organic core materials suffer from warpage, coefficient of thermal expansion (CTE) mismatch, and dielectric loss. Glass core substrates provide near-zero warpage, high thermal tolerance, and ultra-high-density Through-Glass Vias (TGV) to enable the next paradigm of 2.5D and 3D heterogeneous integration.

1. Through-Glass Via (TGV) Pitch & Electrical Performance

Glass substrates feature an isotropic dielectric constant (Dk ~5.2) and ultra-low loss tangent (Df <0.003 at 50 GHz), making them vastly superior to standard BT resins and Ajinomoto Build-up Films (ABF) for high-speed serialized data channels.

Laser-induced deep etching (LIDE) enables TGVs with aspect ratios exceeding 10:1 and diameters down to 20µm at 50µm pitch, allowing high-density signal breakout without parasitic capacitive loading.

Key Engineering Takeaways

  • Through-glass via aspect ratios exceed 10:1 with sub-micron sidewall roughness.
  • Ultra-low dielectric loss ensures signal transmission integrity up to 100 GHz RF and optical modulation.

2. Thermal Expansion Matching and Silicon Die Coplanarity

A primary failure mechanism in large-area SiP assemblies (>70x70mm) is shear stress on micro-bumps caused by CTE mismatch between silicon (2.6 ppm/°C) and organic cores (12-16 ppm/°C).

Engineered borosilicate and aluminosilicate glass cores closely match silicon at 3.2-3.8 ppm/°C, virtually eliminating die-attach shear strain and enabling reliable flip-chip assembly of sub-40µm micro-bump arrays.

Key Engineering Takeaways

  • CTE matching (3.5 ppm/°C) reduces micro-bump shear stress by over 65%.
  • Near-zero panel warpage enables higher yield during SMT reflow and capillary underfill dispensing.

Glass Core Substrate vs. Organic ABF Benchmark

Comparative material and electrical parameters for high-density advanced packaging.

Parameter / MetricStandard Organic (ABF)Advanced Glass CoreEngineering Notes
Coefficient of Thermal Expansion (CTE)14 - 18 ppm/°C3.2 - 3.8 ppm/°C (Matched to Si)Drastically reduces solder fatigue in large dies
TGV / Microvia Aspect Ratio1:1 to 2:1 mechanically drilled> 10:1 laser-etched TGVSub-25µm diameter vias at 50µm pitch
Dielectric Loss (Df @ 28 GHz)0.012 - 0.018< 0.003Essential for 112G and 224G SerDes channels
Tags:#Glass Core Substrates#SiP#2.5D Packaging#Thermal Expansion#TGV
Fabrication Ready

Need Prototype for this Design?

Turn your high-speed schematics into reality with ChipPCBA. Automated DFM, fast turnaround from 24h, and IPC Class 2/3 inspection standard. Free DFM analysis with every instant quotation.

Related Engineering Articles

View all
News & Events5 min read

ChipPCBA Unveils SiP (System-in-Package) & 2.5D Substrate Quick-Turn Prototyping Capability

ChipPCBA commissions ultra-fine line 10µm/10µm semi-additive process (mSAP) lines and sub-50µm micro-bump flip-chip packaging for rapid SiP module turnaround.

Hardware Design12 min read

PCIe 6.0 & PAM4 High-Speed Design: 32+ Layer Stackup, Loss Budget & Surface Roughness Compensation

Comprehensive analysis of PAM4 4-level modulation loss budgets, Megtron 7 dielectric selection, copper foil roughness compensation, and backdrill stub resonance elimination for 64 GT/s channels.

SMT Assembly8 min read

Design for Assembly (DFA): Best Practices for 0.25mm Pitch BGA and 01005 Components

Essential solder paste aperture ratios, pad land patterns, solder mask dam clearances, and thermal relief design for 0.25mm Pitch BGA and ultra-fine pitch components.