3
Microwave GCPWGhione & Naldi (1987)Wadell Coplanar Guide

Grounded Coplanar Waveguide (GCPW) Calculator

Designs 50Ω coplanar waveguides with bottom ground plane for microwave RF, radar, 5G, and millimeter-wave modules up to 40 GHz.

Engineering Units & Substrate

Parameters & Geometry Inputs

Center Conductor Width (W)(中心导带宽度)
mm
Ground Clearance Gap (S)(与侧面地间隙)
mm
Substrate Height (H)(介质厚度)
mm
Copper Thickness (T)(铜箔厚度)
mm
COPLANAR Cross-Section CAD
Scale: Dynamic Auto-Fit (mm)
GND Reference PlaneGND POURGND POURSignal (RF)W=0.3 mmS=0.2 mmH=1.6 mmSubstrate (εr=4.4)
Copper Conductor
Dielectric Core (FR-4/Rogers)
EM / Heat Flux Lines
GCPW Impedance (Z₀)Nominal Target
110.1Ω

Target 50Ω Nominal

Fab Tolerance (±10%):99.09 - 121.11 Ω
Effective Dielectric (ε_eff)
1.118
Propagation Delay
3.53ps/mm
Coplanar Ratio k
0.429
RF Radiation Isolation
High (Coplanar Shield)
ChipPCBA DFM Ready
Fast-Turn Fab

Apply Parameters to Instant PCB Quote

Directly port your calculated geometry and impedance specifications into ChipPCBA's intelligent pricing engine with automated DFM checks.

Exported Parameters:
Stackup:4 LayersImpedance:110.1 ΩTrace Width:0.3 mmSpacing:0.2 mmMaterial:FR-4 Standard
Apply to PCB Quote
24h Turnaround
IPC Class 2/3
Free DFM Review