3
ChipPCBA Turnkey ServiceTDR coupon tested ±5% tolerance

Ready to manufacture controlled impedance boards with 24-hour rapid turnaround?

Start PCB Order with Impedance
IPC-2141A Transmission Line HubIPC-2141AWadell (1991)Polar SI8000 VerifiedChipPCBA Certified

PCB Characteristic Impedance Hub (IPC-2141)

Comprehensive multi-topology RF & high-speed transmission line solver. Seamlessly switch between Microstrip, Stripline, Differential Pair, and Grounded Coplanar Waveguide (GCPW) with ChipPCBA standard stackup auto-fill.

Engineering Units & Substrate

Parameters & Geometry Inputs

Trace Width (W)(走线宽度)
mm
Dielectric Height (H)(介质层厚度)
mm
Copper Thickness (T)(铜箔厚度 (1oz ≈ 35μm / 1.37mil))
mm
Dielectric Constant (εr)(相对介电常数)
Dk
MICROSTRIP Cross-Section CAD
Scale: Dynamic Auto-Fit (mm)
GND Reference PlaneSignal TraceW=0.18 mmT=0.035 mmH=0.1 mmSubstrate (εr=4.4)
Copper Conductor
Dielectric Core (FR-4/Rogers)
EM / Heat Flux Lines
Microstrip Impedance (Z₀)Nominal Target
46.34Ω

Nominal Controlled Impedance

Fab Tolerance (±10%):41.71 - 50.97 Ω
Effective Dielectric (ε_eff)
3.367
Propagation Delay
6.12ps/mm
Delay in Mils
0.155ps/mil
W/H Ratio
1.8
ChipPCBA DFM Ready
Fast-Turn Fab

Apply Parameters to Instant PCB Quote

Directly port your calculated geometry and impedance specifications into ChipPCBA's intelligent pricing engine with automated DFM checks.

Exported Parameters:
Stackup:4 LayersImpedance:46.34 ΩTrace Width:0.18 mmMaterial:FR-4 Standard
Apply to PCB Quote
24h Turnaround
IPC Class 2/3
Free DFM Review

Physics Principles & Formula Derivation

Impedance calculations follow Wadell and IPC-2141A empirical closed-form equations verified against 2D boundary element field solvers (BEM) and Polar SI8000.

  • Effective Width: Corrected for trapezoidal etching erosion and copper thickness: W_eff = W + (1.25·T/π)·(1 + ln(2H/T))
  • Differential Mode: Inter-trace capacitive and inductive coupling reduces differential impedance: Z_diff = 2·Z₀·(1 - 0.48·exp(-0.96·S/H))
  • Propagation Delay: Signals travel according to effective dielectric: t_pd = √(ε_eff) / c (approx 140–160 ps/inch on FR4).

ChipPCBA IPC Tolerances & DFM Guidelines

ChipPCBA guarantees ±5% or ±10% controlled impedance tolerance across 1 to 32 layer builds using automated inline TDR coupon testing (Tektronix sampling scope).

To achieve target impedance in production: CAM engineers calibrate dielectric prepreg pressing thickness and apply dry-film etch compensation (+15μm) before laser direct imaging (LDI).