3
RF & High-Speed MicrostripIPC-2141AHammerstad-JensenChipPCBA Impedance

Microstrip Characteristic Impedance Calculator

Calculates single-ended surface microstrip trace characteristic impedance Z₀, effective dielectric constant ε_eff, and propagation delay based on IPC-2141A and Hammerstad-Jensen models.

Engineering Units & Substrate

Parameters & Geometry Inputs

Trace Width (W)(走线宽度)
mm
Substrate Height (H)(介质层厚度)
mm
Copper Thickness (T)(铜箔厚度 (1oz = 35μm))
mm
Dielectric Constant (εr)(介电常数)
Dk
MICROSTRIP Cross-Section CAD
Scale: Dynamic Auto-Fit (mm)
GND Reference PlaneSignal TraceW=0.25 mmT=0.035 mmH=0.15 mmSubstrate (εr=4.4)
Copper Conductor
Dielectric Core (FR-4/Rogers)
EM / Heat Flux Lines
Characteristic Impedance (Z₀)Nominal Target
49.51Ω

Target 50Ω Nominal

Fab Tolerance (±10%):44.56 - 54.46 Ω
Effective Dielectric (ε_eff)
3.337
Propagation Delay
6.09ps/mm
Delay (ps/inch)
154.69ps/in
Signal Velocity
54.7% c
ChipPCBA DFM Ready
Fast-Turn Fab

Apply Parameters to Instant PCB Quote

Directly port your calculated geometry and impedance specifications into ChipPCBA's intelligent pricing engine with automated DFM checks.

Exported Parameters:
Stackup:4 LayersImpedance:49.51 ΩTrace Width:0.25 mmMaterial:FR-4 Standard
Apply to PCB Quote
24h Turnaround
IPC Class 2/3
Free DFM Review