3
Inner Layer StriplineIPC-2141AWadell 1991Cohn Stripline Method

Stripline Characteristic Impedance Calculator

Calculates the characteristic impedance of inner-layer stripline transmission lines sandwiched between two reference ground planes for optimum EMI suppression and signal integrity.

Engineering Units & Substrate

Parameters & Geometry Inputs

Trace Width (W)(走线宽度)
mm
Trace-to-Plane Spacing (H)(走线至参考地平面距离)
mm
Copper Thickness (T)(铜箔厚度)
mm
Dielectric Constant (εr)(介电常数)
Dk
STRIPLINE Cross-Section CAD
Scale: Dynamic Auto-Fit (mm)
TOP REFERENCE PLANE (GND / PWR)GND Reference PlaneEmbedded TraceW=0.2 mmT=0.035 mmB=0.2 mmDielectric Substrate (εr=4.4)
Copper Conductor
Dielectric Core (FR-4/Rogers)
EM / Heat Flux Lines
Stripline Impedance (Z₀)Nominal Target
41.31Ω

Target 50Ω Nominal

Fab Tolerance (±10%):37.18 - 45.44 Ω
Effective Dielectric (ε_eff)
4.4
Propagation Delay
7ps/mm
Ground-to-Ground Sep (B)
0.435mm
Recommended Layers
≥ 4 Layers (Inner)
ChipPCBA DFM Ready
Fast-Turn Fab

Apply Parameters to Instant PCB Quote

Directly port your calculated geometry and impedance specifications into ChipPCBA's intelligent pricing engine with automated DFM checks.

Exported Parameters:
Stackup:6 LayersImpedance:41.31 ΩTrace Width:0.2 mmMaterial:FR-4 Standard
Apply to PCB Quote
24h Turnaround
IPC Class 2/3
Free DFM Review